The HALO Process

Material gradients, not coatings.

HALO is a proprietary additive manufacturing process that builds dissimilar material gradients directly into a part — eliminating the need for thermal barrier coatings at the source.

The Problem With Coatings

Coatings are a patch on a fundamental problem.

Thermal barrier coatings have been the industry's answer to extreme-temperature environments for decades. They work — until they don't. Delamination, spallation, oxidation, and recoating cycles are not edge cases. They are the expected lifecycle of every coated component.

30–50%
of TBC failures are delamination-driven
3–5×
recoating cycles over a component's service life
Zero
interface failures in HALO monolithic builds
Thermal coating failure — delamination and spallation on a metal surface

Conventional thermal barrier coatings fail at the coating–substrate interface — the exact problem HALO eliminates.

The Science

Gradients, not interfaces.

A coating creates an interface — a discrete boundary between two materials with different thermal expansion coefficients. That interface is where failure begins. HALO eliminates the interface entirely by transitioning between materials continuously across the part geometry. There is no boundary to fail.

Material gradient cross-section visualization
Ceramic faceMetal substrate

Continuous material transition rendering — no discrete interface

01

Functionally Graded Materials

HALO builds Functionally Graded Materials (FGMs) — components whose composition changes continuously from one material to another across a defined spatial gradient. The transition is engineered, not bonded.

02

Dissimilar Material Deposition

The HALO process deposits multiple material feedstocks simultaneously, varying their relative proportions in real time as the build progresses. The result is a smooth, controlled transition between materials with fundamentally different properties.

03

Monolithic Part Integrity

Because the material transition is continuous, the finished part is monolithic — a single unified structure with no bonded layers, no adhesive interfaces, and no discrete coating boundary. It performs as one material system.

04

Engineered Thermal Management

The gradient is designed to manage thermal gradients across the part — transitioning from a high-temperature-capable ceramic face to a structural metal substrate in a single build, with thermal expansion matched at every point.

HALO vs. Thermal Coatings

A direct comparison.

AttributeThermal CoatingsHALO Process
Failure modeDelamination at coating–substrate interfaceNone — no interface exists
MaintenancePeriodic recoating requiredNo recoating — ever
Part integrityMulti-layer assemblyMonolithic single structure
Thermal expansionMismatch at interface causes stressGraded — matched throughout
WeightAdded mass from coating layersNo additional coating mass
Design freedomLimited by coating application constraintsFull 3D gradient geometry
Capabilities

What HALO can build.

Metal-to-Ceramic Gradients

Transition from structural metals to high-temperature ceramics within a single part — the core capability enabling coating-free thermal management.

Multi-Material Builds

HALO supports gradients across more than two materials — enabling complex multi-zone parts with distinct property regions connected by engineered transitions.

Complex Geometries

The additive process supports internal channels, conformal cooling passages, and complex 3D geometries that are impossible with conventional coating processes.

Precision Gradient Control

Gradient profiles are executed with extreme precision — enabling repeatable, validated material transitions across production builds.

See HALO applied to your application.

We're seeking partners for custom applications and process optimization — organizations with specific multi-material gradient requirements who want to develop the process alongside us. If that's you, let's talk.